The Timberline Track Bar Kit is designed to work in conjunction with our 4-Link Kit to provide stability between the Dana 60 axle and factory van frame. Our design bolts directly to the outside of the power steering gearbox frame area and only fits one way.
Installation requires trimming of engine cradle which is easily accessible. Our design safely relocates support area of removed material from cradle crucial to proper fitment, rigidity and longevity of the van chassis under duress. Due to forces imposed during driving, both frame and axle side brackets are required to be properly welded in after bolting up.
Construction Notes: Plates made from CNC cut 1/4" and 3/16" A36 steel, track bar tube 1.5" cold rolled solid steel round, C1018 grade. Heim joints are heat treated chromoly with zinc misalignment spacers. Frame side track bar bracket comes powdercoated with weld pattern pre-cleaned. During installation, axle side track bar bracket becomes thoroughly hot. So this item ships bare. After welding up, allow to cool slightly and prime/paint, effectively bake setting your paint.
Track Bar Kit
Axle Fitment From: 2005-2012 Ford F-Series Superduty, F-250/F-350 Dana 60 Front Axle, SRW or Dual Rear Wheel
Kit Fits Models: 8 Lug E-150 (2008-2014), E-250 (1995-2014), E-350/450 (1995-Current). All standard engines and sub-models
Tool Requirements: Pneumatic impact gun and/or torque wrench, appropriate sockets, wrenches, angle cutter or ideally plasma cutter, pneumatic or otherwise grinder for surface weld-prep, minimum 220v welder w/ shielding gas, touch up spray paint (semi-flat black)